The effect of adding micro zinc oxide filler to heat-polymerizing acrylic resin on some physical properties

Muthanna Medical Journal
Volume 3, Issue 2, December 2016, Pages 80-85

Research Article                                                                         

Ihab N.Yassin 1* Alaa Azat Abdulmajeed, Firas Abd Kati Al-Shammari

*Corrospondance author:
1Department of prosthetic dentistry, College of Health &Medical Technology, Iraq
Received 04 September 2016, Accepted 05 November 2016, Available online 04 December 2016.
This is article distributed under the terms of the Creative Commons Attribution License (, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Copyright © 2016 IY


Statement of problem: In dentistry, the acrylic resins are the common materials used for fabrication of removable dentures to restore function, appearance, etc. However, such restorative substances have to be lacking some physical properties. The aim of the current study to assess the effect of zinc oxide filler on some physical properties of heat cured acrylic resin. A total of 40 acrylic specimens were fabricated. Depending on the type of test, they were divided into water sorption and porosity groups. For each group, 20 specimens were reinforced with zinc oxide particles at 1% by weight and the others were considered as control. The porosity and water sorption tests were carried out for each specimen. The specimen’s data were analyzed and comparison was made by independent t test. The results showed that there was a slightly reduction in water sorption and porosity after incorporation of zinc oxide filler. In conclusion; the addition of ZnO powder to heat cured acrylic resins affects slightly their physical properties.

 Keywords: Zinc oxide; Acrylic; Porosity; Water sorption

Get Full Access/PDF

Be the first to comment

Leave a Reply

Your email address will not be published.